精品人妻一区二区,黄色视频网站岛国,97ZYZ人人操,色性区综合网

POSITION:HOME > NEWS

NEWS

Influence of thickness and size of plate heat exchanger on pressure bearing

The stiffness of the plate refers to the ability of the plate to deform according to the requirements of the medium under different pressures under the clamping action of the fixed compression plate and the movable compression plate after assembly.
Under normal working conditions, in addition to sufficient strength, the plate needs to have a certain rigidity to control the deformation process of the plate, so that the heat transfer medium in the plate channel Uniform thickness ensures heat transfer efficiency. According to the principle of thermal expansion and contraction, the increase or decrease of temperature causes expansion or contraction of the sheet, but the expansion or contraction of the sheet is limited by the fixed pressing plate and the movable pressing plate. When the thermal expansion and contraction cannot be carried out completely freely, stress is generated, which requires the heat transfer sheet to have sufficient rigidity and pressure resistance. In the structural design of the slabs, it is often necessary to arrange the support points and increase the ribs reasonably. The stiffness of the slab depends not only on the density and accuracy of the position of the support but also on the length, width and thickness of the slab.
At present, the plate types of heat exchanger plates at home and abroad vary widely, and there are hundreds of forms. There are various types such as 1:2, 1:3, etc. in terms of aspect ratio. There are also 1:1, 1:4, 1:5, 1:6, etc. under special working conditions. Different working conditions use different aspect ratios, and their pressure bearing capacity is not the same. After years of development and development of the plate type, the aspect ratio of the plate is one of the important factors affecting the stiffness of the plate.
For liquid and liquid conditions, the design of heat exchanger plates has a tendency to develop toward narrow and long. The narrow and long plate can effectively reduce the side flow phenomenon of the fluid, so that it can flow as uniformly as possible in the channel to enhance the heat exchange effect. In addition, it also provides favorable conditions for increasing the lateral stiffness of the sheet. The longitudinal stiffness of the plate can be ensured by 4 to 6 pairs of clamping bolts and fixed pressing plates and movable pressing plates; and in calculating the lateral stiffness of the plates, not only the deformation of the two plates after clamping, but also the force deformation after clamping. Also consider the liquid pressure and the tensile force of the gasket, as well as the deformation and misalignment of the plate support points. When the lateral stiffness of the sheet is insufficient to overcome the above deformation, it is possible that a leak occurs between the gasket and the sheet. Practice has proved that when the aspect ratio of the plate is about 1:2 5 and 1:3, the pressure bearing capacity of the plate heat exchanger can reach 2.5MPa, which is lower than this value, and the pressure capacity of the whole machine is 1.0-1.6 MPa.
2019/05/11 08:30:35 5674 Click

j午夜j动态j图片| 久久精品熟女亚洲AV夜色| 亚洲日韩福利| 亚洲中文字幕Av片| 18禁黄网站禁片免费观看国产| 激情图片小说| 蜜穴久久无码| 国产精品国产三级国产专播品爱网 | av电影久久久久久久| 中文字幕视频二区人妻2020| 精品一区二区亚洲欧美日本| 成人mm一区二区三区| 亚洲精品午夜久久久久久久灵蛇爱| 亚洲色图欧美套图| 欧美久久夜色| 国产一区二区三区无码免费播放 | 亚洲成年人毛片| 中文字幕无码视频在线播放| 高潮喷吹亚洲专区| 南靖县| 播播日韩老熟女| 九九热在线观看| 五月五夜婷婷| 久久综合九色综合97_久久久| 亚洲尤物an一区中文字幕| 欧美一级免费簧片| 人妻少妇被猛烈进入中文字幕| 色哟哟哟一一视频入口| 天天操你天天玩你| 国产免费淫秽视频| 日本精品高清一区二区| 91区久久久精品| 婷婷丁香五月丁香五月丁香| 激情 六月 婷婷| 国产精品欧美日本| 四虎成人亚洲无码| 精品无码不卡视频| 国产精品四虎在线| 日本xxx在现欢看| 日本不卡一区二区三区在线播| 午夜爱爱免费视频无遮挡|